Fujitsu MHT2030AT IDE / Error ABR

[Navafigo]

Hello everyone
I am trying to recover a FUJITSU MHT2030AT Ide. Your original bios is burned. But I have a plate of the same characteristics.

When I connect it to the PC3000 it gives me the error "HDD ID has not been read." ERROR: Device error detected "ABR" Run utility? "

I know it's because the bios is not the original but how can I write your original bios?

They told me about a fujitsu program on floppy disk that does that function but I have no idea.

Please help

 

[jol]

have you tried to move the chip ?
or read it with an external programmer ?

 

[Navafigo]

Hi Jol, thanks for answering me

Yes, I moved the original chip to the spare pcb but it did not work. Right now I have a pcb with the same characteristics as the original and with a chip that is not burnt but that put it on PC3000 gives me the error "HDD ID has not been read." ERROR: Device error detected "ABR" Run utility? "

or read it with an external programmer ?

No, only with the pc3000

 

[jol]

I find it hard to believe that this chip ended up burned (unless it was overheated Etc.)
therefore I would suggest to read it with an external programmer.

alternatively you can upload a picture from both sides of the "HDD" and maybe someone can send you the a copy of the ROM
or you can try asking [email protected] to send you a matching ROM
search here if they have a matching ROM for you

 

[Navafigo]

Thanks Jol, this is the HD

 

[jol]

Donordrives has 2 matching PCBs (http://www.donordrives.com/catalogsearc ... 06297-B023), ask them ([email protected]) if they are willing to send you the ROM contents

 

[Navafigo]

Thank you so much Jol, i will try.