Firmware Server Access

[Jared]

Just FYI to everyone, this server will likely be offline at times for the next week or two. There's a failing drive, and the NAS it's running on has zero redundancy (RAID 0). I'll have to swap it over to another NAS later, but I've been too busy to mess around with it lately.

 

[Amarbir[CDR-Labs]]

Hello Jared ,
Can i have password please

 

[SuperData]

Dear Admin, can I please have the password for the server? Thanks

 

[pclab]

I believe that the access will be done after "proving" to be a DR guy.

 

[Amarbir[CDR-Labs]]

No reply ,
I did not get any reply from jared i m sure he missed these posts

 

[thanh.tạ]

User Name: firmware
Password: Contact Admin
Both username and pass are case sensitive.

If you have problems viewing it, you can use the direct link: https://www.file-medics.com

Dear Jared.
I am a novice in data recovery.
I am currently trying to find the hard drive firmware database.
If possible, please send me the password.
Sincerely thank.

 

[Jared]

[post]9743[/post] Dear Jared.
I am a novice in data recovery.
I am currently trying to find the hard drive firmware database.
If possible, please send me the password.
Sincerely thank.

Hi Thanh,

To get access to the firmware resources you must be an active member of the forum. I don't give out the password when it's requested on the very first post. Try participating here for a bit, then ask again.

 

[thanh.tạ]

Hi Thanh,

To get access to the firmware resources you must be an active member of the forum. I don't give out the password when it's requested on the very first post. Try participating here for a bit, then ask again.

HI Jared, i will try.
Thanks for your reply .

 

[crwberlin]

Hello Jared,
I would like to log in to the firmware server.
Can you please give me permission to log in.
Thanks from Germany.

 

[Jared]

Hello Jared,
I would like to log in to the firmware server.
Can you please give me permission to log in.
Thanks from Germany.

As I've told the last dozen people already on this thread. The firmware server is only for active members who contribute to this forum. If your first post is asking for free resources, you don't get access.