im using SystemRescueCd its a live linux boot OS. can you interpt the following results
it doesnt matter to me if the drive is dead or alive im just trying to understand the results so i can learn from this and maybe understand because i have a whole bunch of drives that im gonna be testing ( i have a fair bit of down time at the moment)
Should i be using a different boot cd to test drives? on the partedmagic iso i use Testdisk and photorec for recovery. i have NOT used testdisk on this disk yet
Complete error log:
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 1
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 [0] occurred at disk power-on lifetime: 656 hours (27 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 04 08 0f 40 00 Error: ICRC, ABRT at LBA = 0x0004080f = 264207
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 03 03 00 10 00 00 00 04 08 00 40 00 03:11:27.725 READ DMA EXT
25 03 03 00 01 00 00 00 04 08 00 40 00 03:11:27.720 READ DMA EXT
25 03 03 00 10 00 00 00 04 08 00 40 00 03:11:27.716 READ DMA EXT
25 03 03 00 10 00 00 00 04 08 00 40 00 03:11:27.714 READ DMA EXT
25 03 03 00 04 00 00 00 04 08 40 40 00 03:11:24.850 READ DMA EXT
it doesnt matter to me if the drive is dead or alive im just trying to understand the results so i can learn from this and maybe understand because i have a whole bunch of drives that im gonna be testing ( i have a fair bit of down time at the moment)
Should i be using a different boot cd to test drives? on the partedmagic iso i use Testdisk and photorec for recovery. i have NOT used testdisk on this disk yet
Complete error log:
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 1
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 [0] occurred at disk power-on lifetime: 656 hours (27 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 04 08 0f 40 00 Error: ICRC, ABRT at LBA = 0x0004080f = 264207
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 03 03 00 10 00 00 00 04 08 00 40 00 03:11:27.725 READ DMA EXT
25 03 03 00 01 00 00 00 04 08 00 40 00 03:11:27.720 READ DMA EXT
25 03 03 00 10 00 00 00 04 08 00 40 00 03:11:27.716 READ DMA EXT
25 03 03 00 10 00 00 00 04 08 00 40 00 03:11:27.714 READ DMA EXT
25 03 03 00 04 00 00 00 04 08 40 40 00 03:11:24.850 READ DMA EXT
