Seagate MCMT corruption rcovery plan.

Z

zeus

New member
HI Jared & Friends
I need some guidelines for recovery of Seagate Barracuda Model - ST500DM002 Firmware CC4C

I suspect it has MCMT corruption. What should be my steps using PC3000 udma.

Rst 0x40M
MC Internal LPC Process
Spin Up
TCC-0018
RECOV Servo Op=0900 Resp=0005
RECOV Servo Op=0055 Resp=0005
(P) SATA Reset

MCMainPOR: Start:
Check MCMT Version: Current
MCMainPOR: Non-Init Case
MCMainPOR: EXCEPTION: MCMT PRI copy corrupt
MCMainPOR: MCMT SEC copy valid
Reconstruction: MCMT Reconstruction Start
Max number of MC segments 0A61
Nonvolatile MCMT sequence number 0004E819
[RSRS] 0385
RECOV Servo Op=0255 Resp=0005
ProcessRWError -Read- at LBA 000000000002D894 Sense Code=40000087
RECOV Servo Op=0065 Resp=0005!

RECOV Servo Op=0255 Resp=0005
ProcessRWError -Read- at LBA 000000000002D895 Sense Code=40000087
InitiateMarkPendingReallocateRequest for disc_lba: 000000000002D895!

Reconstruction: EXCEPTION: Seg Read Fail: Status = 0000
Continuing after error
Reconstruction: Completed 1:
[MCMTWS]
Rst 0x40M
MC Internal LPC Process
Spin Up
TCC-0018
RECOV Servo Op=0900 Resp=0005
RECOV Servo Op=0055 Resp=0005
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE


Thank you
 
Jared

Jared

Administrator
Staff member
Problem is most likely in media cache. Read system file 93 by terminal, disable everything, write back by terminal and you should be good. If the drive is getting stuck busy you may have to short the read channel to get terminal access each time. Often you have to do it twice. Once to read the system file, and a second time to write it back.
 
vijayan

vijayan

Member
DFL TOOL AUTO > READY TO BUY FIX AFTGER HDD WORKING

Model : ST500DM002-9YN14C
Serial : S1D24F2V
Firmware : CC4C
Capacity : 500 GB (976 773 168)
 
Last edited:
You must log in or register to reply here.
Top