Toshiba USB to SATA Guide

[Isidoro80]

You can try, but I don't think it will make too much difference.

if you tell me so maybe it's not even worth trying. to transfer the bios from the old card to the new one, do I have to transfer the chip or can I use a hardware programmer for bios? transferring the chip is difficult.

 

[Isidoro80]

You can try, but I don't think it will make too much difference.

Thanks

 

[pclab]

You can read and write with a programmer, but you have to remove them.

 

[2sharn]

Dear Members, New to this, appreciate a prompt response / direction. performing the ROM / BIOS swap; from G003054A -----> G002825A

The 3054A has 2x 8 pin chips as IC602 and IC606 that is USB PCB, while 2825A SATA board has only 1 marked as IC602. Seeking confirmation that the ROM chip is IC602 on the G003054A needs to be swapped to G002825A?

 

[Jared]

Yes. IC602 is the one.

 

[2sharn]

Yes. IC602 is the one.

Drive is working and multiple backups created. Thank you.

 

[gazishahin]

Hi

Does anyone know MQ04UBF100 (USB) Compatible donor drive? PCB is G4330A. Thanks in advance

 

[Jared]

Hi

Does anyone know MQ04UBF100 (USB) Compatible donor drive? PCB is G4330A. Thanks in advance

My money is on G4311A since that's what the SATA MQ04ABF100 uses.

 

[gazishahin]

My money is on G4311A since that's what the SATA MQ04ABF100 uses.

Thanks

 

[igen]

USB G0089A - SATA G4311A
works - the same controller 88i1017