WD20EZAZ-00L9GB0-Desktop HDD with "continues Power Re boot "

[betty]

I have a WD 2tb Desktop HDD with "continues Power Re boot " . Model : WD20EZAZ-00L9GB0. i CHANGE THE PCB, UNLOCKED PCB, MODULES 2& 32, HEAD. Still problem persist. When Block the SA with the help of Unlock PCB , then no problem(pwr re boot) and continuous spinning and i can access the SA and modules . All modules can be read without any obstacles . In ACE , there have no proper family , but i use with "ViniceR". I think you also experienced with the same family...​

Thanks is Advance

 

[Jared]

Are you able to fully read module 190 on both copies without any issues?

 

[betty]

Thanks Jared,
YES I can read module 190 with both copies

 

[gps31]

can u send 02

 

[betty]

sending 02


thanks....

 

[Jared]

I'm wondering if it might be a bad head and it's repowering when it gets to buffering from that head. Have you tried messing with the head map to disable heads?

 

[betty]

yes i tried head map with disable heads.... ,When I block the SA, then hdd getting smooth spinning and I can access the SA

 

[gps31]

Still unsolved?

 

[starparas]

Did you Replace the heads? i had the same problem with 4tb desktop drive with pcb number 800011. client did not pass the quotation for the head replacement and it was returned unrecovered.

 

[gps31]

Did you Replace the heads? i had the same problem with 4tb desktop drive with pcb number 800011. client did not pass the quotation for the head replacement and it was returned unrecovered.

It can be solvable