Freekingeeks
Member
Hello,
This rosewood drive gets ready but goes to BSY as soon as I try to access any sector.
below is terminal output.
I have got all the important modules backedup. Also when I try to write updated 93 in indirect ATA mode it gets bsy and fails.
Kindly advise.
This rosewood drive gets ready but goes to BSY as soon as I try to access any sector.
below is terminal output.
Code:
(P) SATA Reset
RAW OFF
PASS
Drive AMPS Configuration has been modified from compiled defaults.
Drive must be re-initialized to controller firmware defaults by re-downloading controller firmware
DO NOT SHIP WITHOUT FIRST RE-DOWNLOADING CONTROLLER FIRMWARE OR RESETTING TO DEFAULTS!
(DOS Table) Worst Count: 00000FFA At SU: 0000531D NT: 00000000 OT: 00000020
MSP213
(MC POR Duration): 0000000045
PrgF
PrgF
Intel 6G->3G
Send Status: COMRESET seen
CSpd= 3Gbps
DSC
Common path start quit now ProcessRC: 00000000,00000000SkipLen: 00000000ReadContinuous: 0E06D933,00000322UnrecovSectorCount:00D7,0321,0042NumUDEs: 000000D7,00000003,00000321Passed: 00000080,00000140,000002D1Out:
PE 43110081
PrgF
LED:0x000000EE FAddr:0x004E6CE0
LED:0x000000EE FAddr:0x004E6CE0
LED:0x000000EE FAddr:0x004E6CE0I have got all the important modules backedup. Also when I try to write updated 93 in indirect ATA mode it gets bsy and fails.
Kindly advise.
